Zyxel GS1900 Zero-Day CVE-2026-107441 Hit Nearly 1,000 Switches
The August hacks of roughly 1,000 Zyxel GS1900 switches were not CVE-2026-7273 after all. Binarly found a separate pre-auth CGI bug, CVE-2026-107441 (CVSS 8.8), so devices patched for the older flaw stayed exposed until Zyxel's October firmware.
Threat card
- Status
- Actively exploited
- Threat type
- Nation-State
- Disclosed
- Nov 3, 2026
- Affected
- Zyxel GS1900 series switches (10 models) on firmware before the 23 October 2026 release
The short version
- Binarly found that nearly 1,000 Zyxel GS1900 switch compromises used a new zero-day, CVE-2026-107441, not CVE-2026-7273.
- The flaw is an unauthenticated out-of-bounds write in the GS1900 CGI program that gives OS command execution.
- Devices patched in June for CVE-2026-7273 stayed vulnerable until Zyxel's 23 October firmware.
- The activity is linked to Red Heron, which deployed Jitterly and Sixzut malware variants.
The Zyxel GS1900 zero-day tracked as CVE-2026-107441 is the real entry point behind the compromise of nearly 1,000 Zyxel GS1900 series switches, according to firmware security firm Binarly. The intrusions had been blamed on CVE-2026-7273, a flaw patched in June, so many administrators believed they were safe. The new bug is an unauthenticated out-of-bounds write in the switch’s CGI program that leads to OS command execution. Zyxel shipped fixed firmware on 23 October and published its advisory on 3 November. Owners of any of the ten affected GS1900 models should upgrade now and treat previously exposed units as potentially compromised.
What happened
Attackers exploited a previously unknown pre-authentication flaw in Zyxel GS1900 switch firmware, CVE-2026-107441 (CVSS 8.8), to run operating system commands on almost 1,000 devices. The activity was first attributed to the older CVE-2026-7273, but Binarly showed the exploit hit a different bug, so the June patch did not stop it.
In September, GreyNoise reported that roughly 1,000 Zyxel devices had been compromised in August and linked the activity to Red Heron, a Chinese threat actor that Acronis had previously caught targeting Gitea instances, as SecurityWeek reported at the time. CISA added CVE-2026-7273 to its Known Exploited Vulnerabilities catalog. Binarly then took a closer look at the exploit and found that the attackers were not using CVE-2026-7273 at all.
As SecurityWeek’s 5 November report explains, the operators deployed variants of the Jitterly and Sixzut malware that Acronis had analysed, but their exploit targeted a separate, previously unknown vulnerability. Binarly says the CVE-2026-7273 patch “remained ineffective” against this actor.
Timeline
| Date (2026) | Event |
|---|---|
| June | Zyxel patches CVE-2026-7273 in GS1900 firmware. |
| August | Roughly 1,000 Zyxel devices are compromised. |
| 21 September | GreyNoise warns that CVE-2026-7273 is being exploited and links the activity to Red Heron. CISA later lists CVE-2026-7273 in KEV. |
| 29 September | Binarly notifies Zyxel of a new, different vulnerability used in the attacks. |
| About two weeks later | Zyxel confirms the new vulnerability. |
| 23 October | Zyxel releases fixed GS1900 firmware. |
| 3 November | Zyxel publishes its advisory for CVE-2026-107441; Binarly publishes BRLY-2026-057. |
| 6 November | ThaiCERT issues an advisory urging GS1900 owners to upgrade. |
How the attack works
Initial access
Per the Zyxel security advisory for GS1900 series switches, CVE-2026-107441 is an out-of-bounds write in the CGI program of the GS1900 firmware. An unauthenticated attacker can send crafted HTTP requests to the device and achieve OS command execution. No credentials and no user interaction are needed, which makes any switch whose web management interface is reachable by an attacker a direct target.
Execution and payloads
Once command execution is gained, the operators deployed variants of the Jitterly and Sixzut malware families that Acronis had documented in its earlier Red Heron research. Neither Zyxel nor the public summaries describe the persistence or command and control details for this wave, so defenders should rely on Binarly’s and Acronis’s technical reports for implant behaviour.
Why the earlier patch did not help
This is the important lesson. Defenders who saw “CVE-2026-7273, patched in June, listed in KEV” upgraded and closed the ticket. Because the exploit actually abused a different code path, the June firmware left the door open. Binarly’s GS1900 pre-auth RCE write-up argues that vulnerability assessment should rest on analysis of the binary code itself, not only on advisories and version numbers.
MITRE ATT&CK mapping
| Tactic | Technique (ID) | How it was used here |
|---|---|---|
| Initial Access | Exploit Public-Facing Application (T1190) | Crafted HTTP requests to the GS1900 CGI program trigger the out-of-bounds write. |
| Execution | Command and Scripting Interpreter: Unix Shell (T1059.004) | The bug yields OS command execution on the switch. |
| Command and Control | Ingress Tool Transfer (T1105) | Jitterly and Sixzut variants were deployed to compromised devices. |
Who is behind it
GreyNoise linked the August activity to Red Heron, which it describes as a Chinese threat actor previously caught by Acronis attacking Gitea instances. Binarly attributes the new zero-day exploitation to the same activity previously linked to that group, based on the reuse of Jitterly and Sixzut variants. No vendor has published further aliases or a confidence level in the material reviewed here.
Affected products and versions
| Product | Affected | Fixed | CVE | CVSS |
|---|---|---|---|---|
| Zyxel GS1900 series switches (10 models) | Firmware before the 23 October 2026 release | GS1900 series V2.90 (patch 3) firmware, per Zyxel’s firmware release notes | CVE-2026-107441 | 8.8 |
| Zyxel GS1900 series switches | Firmware before the June 2026 fix | June 2026 firmware | CVE-2026-7273 (in CISA KEV) | Not disclosed in sources reviewed |
Check the Zyxel advisory for the exact list of the ten affected models and per-model firmware builds before planning the rollout.
Indicators of compromise
No IP addresses, domains or hashes were published in the advisories reviewed for this brief. Network indicators and malware hashes for Jitterly and Sixzut are expected in Binarly’s BRLY-2026-057 report and in Acronis’s earlier Red Heron analysis. Until you have them, hunt on behaviour.
| Type | Indicator | Context |
|---|---|---|
| Behaviour | Unsolicited HTTP requests to CGI paths on the switch management interface | Exploitation vector of CVE-2026-107441 |
| Behaviour | Outbound connections initiated from switch management IPs | Possible implant callback (Jitterly or Sixzut variants) |
| Behaviour | Unexpected configuration changes, new accounts or reboots | Post-exploitation activity on the device |
Detection and hunting
Start with exposure. Query your external attack surface data for GS1900 web management interfaces reachable from the internet; those are the highest-risk units. Then pull firewall and NetFlow logs for the switch management addresses and look for inbound HTTP or HTTPS from untrusted networks, especially bursts against CGI endpoints, since August 2026.
Next, look at what the switches themselves do. A managed access switch should rarely start outbound sessions to the internet. Any egress from a management IP to an unknown host is a strong signal. Compare running configurations against your last known good backup, review local account lists and syslog for unexplained reboots or firmware changes, and verify the firmware image matches the official build. Binarly’s point applies here too: a version string alone is weak evidence of a clean device.
Mitigation and response
- Upgrade every GS1900 switch to the fixed firmware released on 23 October 2026, following Zyxel’s advisory for your model.
- Remove internet access to the web management interface and restrict it to a dedicated management VLAN or jump host.
- Treat any unit that was exposed and ran pre-October firmware as possibly compromised: re-flash from the official image and restore a known good configuration.
- Rotate switch admin credentials and any secrets (RADIUS, TACACS+, SNMP communities) stored on affected devices.
- Hunt for outbound traffic from switch management IPs and for Jitterly and Sixzut indicators once Binarly and Acronis IOCs are loaded.
- Re-review other “patched” KEV items on edge devices where exploitation continued after the fix.
Analyst take
The uncomfortable part of this story is not the bug class, which is ordinary, but the misattribution. The industry did what it is told to do: a CVE was named, KEV listed it, owners patched. Yet the campaign kept working because the exploit never touched the patched code. That pattern has shown up before with edge appliances, as in the chained Ivanti Connect Secure zero-days, and with storage devices running stale firmware like the Synology NAS ransomware wave.
Small access switches sit in branch offices and campuses where nobody watches their logs, which is exactly why a state-linked operator would want a thousand of them. Organisations with distributed sites and flat management networks should worry most. The practical takeaway is to verify fixes against observed exploitation, not against an advisory title, and to keep management planes off the internet. Readers tracking similar KEV-driven patch cycles can see how fast exploitation followed in our GitLab CVE-2026-97229 brief.
What to do now
0 of 5 done
Questions readers ask
What is CVE-2026-107441?
It is an unauthenticated out-of-bounds write in the CGI program of Zyxel GS1900 switch firmware that lets attackers run OS commands with crafted HTTP requests. It has a CVSS score of 8.8.
Is the CVE-2026-7273 patch enough?
No. Binarly found the August attacks used CVE-2026-107441, so you need the firmware Zyxel released on 23 October 2026.
Who exploited the Zyxel GS1900 zero-day?
GreyNoise linked the activity to Red Heron, a Chinese threat actor, and Binarly ties the zero-day use to the same operation through reused Jitterly and Sixzut malware.
Sources
- Zyxel: Security advisory for out-of-bounds write vulnerability in GS1900 series switcheszyxel.com
- Binarly: Zyxel GS1900 pre-auth RCE CVE-2026-107441binarly.io
- SecurityWeek: Zyxel switch hacks blamed on patched flaw actually exploited a zero-daysecurityweek.com
- ThaiCERT: Zyxel GS1900 switches exploited through zero-day CVE-2026-107441thaicert.or.th
One short email when something serious breaks.
Threatspedia covers major cyber threats only, verified against primary sources. Read our editorial policy, or report a correction.


